Once again Brunswick responds to the market.  To complement the success of the Fury, bowlers asked for a pearlized version.  Answering the call, Brunswick delivers the Fury Pearl.

Coverstock
Building on the success of the original Fury, the Fury Pearl utilizes a pearlized coverstock and a smoother Coverstock Finish to create a ball with a back-end reaction that is truly BIG.  The Fury Pearl utilizes a pearlized version of the High Octane coverstock used on the original Fury.  The pearl additive helps create more length and saves hooking action for the back-ends.

Glossy Non-Compound Finish
The bowling industry is starting to embrace the surface finishes created by 2000-grit and 4000-grit abrasives.  These abrasives create a glossy finish that many bowlers would assume are polished with a wax or similar compound.  The benefit to the bowler is that these finishes create length similar to balls coated with compound finishes, but are better able to handle carrydown.  The Fury Pearl is finished with 4000-grit Abrasive pads driven by the new Haus high speed bowling ball resurfacing machine. 

Core
The Fury Pearl uses the original Fury’s Torsion Symmetric core system known for its high hook potential, easy revving and powerful, but controllable breakpoints.  Brunswick has twisted the core on the inside of the ball so you can twist it up more on the lanes.

Reaction Characteristics
•Out of the Box: With its 4000-grit finish, the Fury Pearl will provide a more skid/snap reaction than the original Fury and match up well on medium-dry to medium-oily lane conditions.
•If your Fury Pearl goes too long: Shiny surface finishes sometimes cause the ball to go too long before breaking.  To get your Fury Pearl rolling sooner, dull the surface with a 2000-grit abrasive (Abralon or Scotch-Brite Gold pads) to increase hooking action.  To further increase hooking action, use a rougher abrasive to create an earlier reaction.
•If your Fury Pearl hooks too early: Polish your Fury Pearl will Brunswick’s Factory Finish High Gloss Polish to increase length.

To bring your Fury Pearl  back to its original factory finish, sand the surface with 4000-grit Abralon or White Scotch-Brite pads.